be quiet! Dark Base 700, Midi Tower ATX, 2 Pre-Installed Fans, RGB LEDs, Tempered Glass Window

The media could not be loaded. As someone with an E-ATX motherboard, I needed a bigger case to compensate. My previous one being the Dark Base Pro Revision 2. That was a massive case, but had the major flaw of being a pain in the rear to work with. Cramped spaces, weird screw positions, and having to take apart pieces to get to others were all major flaws.This new 901 case solved all of those issues. Installation of my parts from motherboard to PSU were all incredibly simple. My favorite feature being the removable fan trays for ease of AIO installation. There was plenty of room after removing some vanity pieces for my motherboard.The touch controls are a bit finicky, but I rarely mess with them after I set up the fan curve and synced the lighting on the case.Overall, it is a wonderful case and looks gorgeous while being incredibly user friendly.

I just received the new be Quiet! 901 Pro Computer case in all white from Amazon. The Corrugated box arrived in perfect condition, as did the Computer case inside. Unboxing was just like the on-line videos, and everything that was supposed to come with the case was delivered. My initial impressions of the case are that there was a lot of thought and real quality put into the design and manufacturing. The fit and the finish of this case is outstanding. Very well built and robust, and no rough edges, no bad paint, and a ton of options to configure this full tower case the way you want it. Yes, I like having the Optical Drive bay, and I will use it. The case is heavy, but that is due to having a very solid build with thick steel, and thick tempered glass side panel. Even all the wiring from the front panel is white in color. The case is easy to dis-assemble, and none of the thumb screws or phillips screws were jammed in tight, where you strip the heads of the screws to loosen the screw. I think this is one of the few modern cases with a removable motherboard tray. That is a very nice feature when you are assembling your build. Yes, some may think the cost of this case is a bit steep, but for all that you are getting, I really think this case represents real value, and something one can work with and or change for a good many years. This one is a winner. Very glad I purchased this.Addendum: I will add that this case was a pleasure to build my new rig in. There is plenty of space for EATX Motherboards, large Video cards, and ample places for additional drives if you need them. Cable management is fairly easy with a large area in the back of the case. I went with the new DT Phanteks fans, and a 360 water cooling radiator in the front. I am using BIOS for the fan control, but nice to have the option of the case fan speed too. Very happy with this build and the new case to contain it all. Cheers!

The beast has so much room that even fat fingered, eye glass wearing guy like me could get in there and perform detailed cable management. The motherboard tray slides out of its rail so you can mount your gear outside the case and slide it all back in with ease. The same goes with the radiator attachment at the top. I've mounted 5 140 mm fans and 3 120 mm radiator fans. I still have room for another 3 120 mm fans. (and I've just ordered the BQ Light Wings). The case has noise dampening panels if you want quiet or mesh panels for extreme air flow. It's big and sturdy. The case quick start guide is garbage but then again, all Be Quiet manuals are. There are too many features to highlight in a short review. It's expensive but it will really show off your build.

Seriously, this is probably the highest quality case I've ever used. It's worth every penny. Very high build quality, Good feature set. Good cooling profile. Aesthetically beautiful especially when combined with RBG studded gear. It goes very well with ThermalTake's AIO CPU Cooler and G.Skillz TridentZ RBG Ram.If you've never built a computer before, and are considering this case, I recommend it highly. It's very easy to build in, it comes with a very nice feature on the top of the case. (Where you connect either exhaust fans, or a cooling radiator, it has a "Panel" that slides out, allowing you to install the fans outside of the case, then you simply slide the panel with the fans installed back in. A hundred times easier than trying to install fans directly into the case, or having to remove a bunch of panels to install them.If you have built computers before, you'll probably appreciate the cable management system, the included fan/RGB controller, the neatness of PSU shroud (Which also allows for a single 140/120mm intake fan on the shroud it'self.) Once it's put together it's extremely clean looking. It also was designed well, and you can easily fit a 360mm Radiator in the front while still using the PSU Shroud, and an intake fan on the bottom.It also comes with 2 full slide-out Air Filters. No tools required to remove and clean them either. Everything was extremely well thought out.There is only one or two things that could be improved on, honestly.. But they aren't a big deal.