Cooler Master MasterBox ATX Mid-Tower with Sleek Brushed Design, Red Side Trim, & Acrylic Side Panel

I just used this case to build my brand new custom desktop. When building my PC I had a few requirements that were non negotiable. In my old system I had a BluRay Drive that I was going to use in my new build so I needed a case that had at least one external 5.25" slot. I wanted the side of the machine to be open enough to show off the LED lights I had planned for the system. The case also needed to look modern and not break the bank. I found many cases that were awesome looking but only had small windows on the sides, or didn't have a external slot or were flimsy or a combo of all three of those. When I found this case I went over it many times looking at it and finally decided to get it.Its a large case, just incase someone wants to know, I knew it would be large so that is not an issue for me. Building the machine in here was great the external drive slide in and locked super easy. Cabling was easy and with lots of room was able to hind all of the cables. The full glass side shows off the LED lights and all components great! It comes with just one fan which for me needs right now is great. It has plenty of space for additions fans.I would fully recommend this case to anybody looking to build a custom PC.

My wife wanted her own computer so I built her one and this is the case I used. It has plenty of space for everything and looks great.

I bought the MCB-B600L-KANN-S00 version of this case, and it was one of the smoothest installs I've done, and looks very clean. The case feels light, though it is steel, and is robust enough so it does not feel weak when loaded up. The illuminated buttons (white LED's), and the top edge panel ports, are well placed, and also give it a nice quality look. There are tons of places to zip tie wires, and the cable management basement and side areas are sufficient, considering the number of drives it will hold (2 x 3.5" HDD (or SSD), 1 x SSD in the tray, and the 5.25" optical drive). I'd recommend a modular supply though since stuffing excess wires in the basement will probably be a pain. There are 4 total locations to mount the SSD tray, but it only comes with one, and two of the vertical mounted locations could be blocked if the front of the case is set up with more than one fan. There is a mesh panel on the underside to act as a filter for the power supply intake which will face downward. The other openings in the case however do not include filter mesh screens so I expect there will be some dust inside after a while. Getting the 5.25" drive cover off was a bit difficult, but after wedging a flat screwdriver in from the back side and pushing it into the case it popped out.So to summarize:Pros:* Nice looking case which uses good materials where they matter.* Illuminated buttons (white).* Good cable management, and lots of tie points for wires.* 4 places to mount SSD's.* Tooless drive installation for the 3.5" HDD's and 5.25" drive.* Includes one fan (needs min 2 but it's set up so a radiator could be used in front in place of a fan).* Thumbscrews for all the panels and PSU bracket.Cons:* Not all the openings are filtered so it will collect dust.* They should provide at least 2 SSD trays since there are 4 mounting points for them.* It's a bit noisy as there is no sound deadening.This s a nice case for the money, and a solid 4 stars.

I initially ordered this knowing and realizing IT IS an mATX, but I don't know what was I thinking, I did not expect it to be this tiny and this light! Hahaha only word to describe it is.. 'Cute'!Pros:- Great Price ($43 in my case).- Can't find anything as beautiful/attractive as this.- Comes with 3 color trims/pieces to change up your looks.- Really easy to work with (keeping in mind you shouldn't be stuffing it with AIO's or crazy components).- A removable Hard-disk Drive cage!!!- Fits any graphics card you throw in it!- Beautiful Front IO Combo!Cons:- Wouldn't have hurt if it was 1 centimeter wider (I don't know if all mATX got standard width), but it was a little tight to close that left panel.- I don't know if I did not do enough research or what, but I was a bit disappointed with the clear/see-through side panel... I thought it was a tempered glass panel.. turns out it was just plastic! :\ But it still looks cool!- I also just wish they included one of those SSD mounts, so I could stuff the SSD in the back of the Mo.Bo mount and get it out of my face.I'm not exactly complaining. No, I'm more than happy, I'm just giving my honest opinion on what they could've done a bit better. All in all, this was a great and happy purchase, totally recommended!