Cooler Master MasterCase H500M ARGB Airflow ATX Mid-Tower with  Quad Tempered Glass Panels, Dual 200mm ARGB Fans, Type-C I/O Panel,  Vertical GPU Slots & ARGB Lighting System

The media could not be loaded. Tempered glass fans, rejoice! If you love showing off your rig, this case is for you. I have spent a ton of money over the past several months to complete my dream rig. After four failed attempts at finding the perfect case, along comes this beauty.The price is very reasonable for such a high quality product. This thing is built like a tank, easy to clean and has a ton of space for even the largest motherboards out there. Airflow is silly good! The included argb fans are simply amazing. (see video)This beauty holds inside an ASUS ROG STRIX X570 motherboard, R9 3900x cpu, ASUS ROG STRIX 2080ti, 32 gb Patriot Viper RAM @3200 MHz, TT 750 Toughpower Grand PSU (Gold) DEEPCOOL captain rgb 240mm AIO, 2 TB Sabrent Rocket Nvme ssd (gen 4) and of course two 2 terabyte platter HDDs for storage.All that out of the way, there is still plenty of room to add whatever shiny add ons you may want to include.I love this case... have had it for six months with zero issues. If you have any questions, I would love to answer them.Pros and cons!Pros: Shiny, Pretty, Spacious, easy to maintain, Built to last, also easy to build in.Cons: Um yeah, none.Although this is a “niche” pc case, I assure you if bling is your thing... this is your best and only option.

I've happily used Cooler Master cases since the HAF, but was disappointed with the H500's airflow when I switched to it in 2017. However I'm glad to say Cooler Master regained their footing with the H500M. It keeps my favorite things about the H500 design, and greatly improves several shortcomings I had to deal with. The top panel no longer sits loosely on the case so if I needed to carry the case out, I can do so without having to take it apart or worrying about dropping it. The top radiator/fan mount is now 360mm instead of 240mm max so I was able to mount a larger radiator for cooling. It has a USB C port on the front, FINALLY. There's even a discreet built in GPU mount for the saggiest of video cards. But most importantly of all, this thing is an AIRFLOW BEAST. 10900k at 5.2 sits around 50c on full load, 3080 doesn't go past 65c on full load. With the newest GPUs pulling so much power it's more important now than ever to get a good airflow case. If you liked the style of the H500 but were turned away by lack of airflow, the H500M is the case for you.My one con, if I had to say something, would be that although it supports EATX just fine, the cable shroud you would usually tuck your 24 pin behind sits flush with the side of the 24 pin terminal on my motherboard, at least. I was able to route my 24 pin extension around to the other side of the shroud in an aesthetically pleasing way so no real issues. Just keep that in mind.Other things about this case worth mentioning:The dual tempered glass side panels make this case heavier than normal but it gives it a nice symmetrical look and sheen. You won't have to worry about errant cords being visible through the glass because with the entire H500 line there are several wire panels that hide your mess, keeping that nice clean look no matter how much your cable management sucks.The top panel is still not meshed except for side vents but there is noticeably more headroom between the case frame and top of the panel allowing for excellent exhaust flow.The two front 200mm fans are markedly improved from their H500 versions, with more LEDs and quieter bearings.The PSU and HDD shroud below can be configured in many ways, but if you have a 360 radiator for the front intake and want to keep the shroud, there is fortunately a slot that pulls out from the front enabling that particular configuration.It's listed as a mid sized tower and it is, but the H500M is large for its class. Roughly 22 inches tall, 21 inches deep.Its main feature is excellent airflow, but the H500M should be noted as being a very modular case, and can accommodate many kinds of builds. I was almost tempted to go custom loop because of the built in pump bracket and space for two 360 rads.

Love this case. Allot of room for any components. Up to E-ATX MB. Can Fit any RTX 4000 Series Card. I got the Cooler Master Vertical Mount Adaptor for my build. Very good build quality. Love that they include both glass and mesh front panel. Love the number of inputs for USB on the front of the case. I replaced all the fans with Corsair Corsair iCUE LINK QX Fans, 3 x140mm at the front, 1 x 140mm at the rear, CORSAIR iCUE Link H150i LCD at the top. MSI RTX 4070 Ti. BeQuite Dark Power 13 1000 watt. Asrock X570SPGRIPTIDE Mb Asrockx570s Pg Riptide. G.SKILL Trident Z RGB Series (Intel XMP) DDR4 RAM 64GB. All fits without issue and plenty of room. Great air flow. Everything running cool and quite. I would recommend this case to anyone.

The media could not be loaded. Here's my PC configuration- ASUS Z490 Motherboard- Intel Corei5 10400- Nvidia RTX 2070- 32 GB RAM- Deep Cool AIO Liquid Cooling 360mm radiator. Installed on top (see attached pictures)Overall the case looks nice, alot of cool air intake and plent of space for adding 360mm radiator on the top. You also have the choice to either let the radiator fans over the top panel or under. I chose to go over because the fans were not giving me clearance with the motherboard's heatsink. In that case I installed the three 120mm fans over the top panel and screwed them on the radiator.The cable management on the left panel is easy to manage even though I had a 1000W power supply from Zalman since 2009. Manufacturer claims that the allowed clearance for power supply is 200mm, while mine is 220mm and fitted perfectly!