M. E. Fernie
Coming from the standard tower cases this cube case was a really nice change. It is overall very spacious and made organizing all the cables much simpler. As another review mentioned all the thumb screws are on very tight, but nothing a simple screwdriver can't handle and you will most likely need to screw in additional MB standoff screws, I tried to do this by hand and they do not thread well, but using the provided bit along with your screwdriver they will thread in and be very solid. Also had no issues installing my video card (RX 480), if your particular video card is very wide and sticks out more then half an inch from the bracket you could possibly run into issues with it preventing the glass side panel from going back on. Build quality seems pretty good overall considering the price of the case, would definitely recommend to others.Update: 1/11/19Sooooo picked up a Radeon Vega 56........ and unfortunately it does not fit as is, had to trim some metal where the video card plate slides in the back and the video card is also about .25" too wide so the side glass is just hanging from the top two screws. Still really like the case and would recommend it to those who aren't looking to put in the latest generations of huge graphic cards. Will probably upgrade to something else but keep this case for a secondary computer.
Amazon Customer
I don't know why I'm asked how sheer everything is now when I write a review, but this case is a winner no matter how you look at it. I've built so many computers I can't remember them all, for friends, family and myself. This case is the easiest case to work with, a pure joy. I bought a second one days after receiving the first because I loved it so much. This model is a mid tower but they make a very similar full tower case as well. I never respected Rosewill products that much in the past, but this thing is solid as a rock. And the side and front are made of real tempered glass. This makes the case very heavy if that is a concern, but I don't mind that a bit. The best part is how simple it is to manage the wiring. There are rubber pass trough's for the wires near the places where you would need them. I did not really have to route wires and zip tie them because they are only a couple inches long on the side where you would see them. On the back side, under the motherboard, is a large compartment where the excess length's of wire can live. I would add that this case is a very good looking one and it is equipped with decent looking fans. I mean the quality of the fans look pretty decent, not the LED part which I could really care less about. I have to admit they do look pretty cool though, and the glass is very dark, so the bright LED fans don't blind me.
Amazon CustomerAmazon Customer
I bought this case off amazon *Blue* to build my first computer. For the money, it was good for me. I added several more standoffs to the case to mount the motherboard more securely (full size ATX) but I believe it is meant for a smaller ATX form factor. If you use more standoffs, a wrench will help them on more smoothlyTaking care apart: Very easy--make sure not to lose the rubber grommets.Dual-chamber design is very cool and I think very useful to keep things organized and cables managed.Fans: Not the best fans..a little noisy, but airflow is great and is keeping my cpu cool. i have a Coffee lake i5 in there and a CPU fan, but water cooling does fit if you want it.Graphics card housing--a little tight but I did manage to fit it with little issue. Have a GeForce GTX 1070 in there.PSU: no issues at all installing and running cable through case.Aesthetic--you need more LED lighting of your own, as it only has the two 120mm fans on the front.I/O ports: ok, not top of the line but everything fit mostly without issue.Overall, good case for the money, and especially for those trying to fit alot in a small package. probably better for micro ATX or smaller motherboards, but full size is just fine.
Fern
I wanted a high quality case with real glass windows, this fits the bill perfectly and the price, well there is no competition. Plenty of room for a huge power supply, tinted glass so the fan lights are not too bright. Quit as can be with a liquid cooler.No flex anywhere in the chassis. Solid and thoughtful construction. Thumb screws for removing front and back make for sturdy connections and frame alignment. Buttons are nice if not a little more plasticy given the glass everything else, a non-pressure style would be great, but would ad to the cost... so for the price it is amazing.