GIGABYTE X570 I AORUS Pro Wi-Fi (AMD Ryzen 3000/X570/Mini-Itx/PCIe4.0/DDR4/USB 3.1/Realtek ALC1220-Vb/DisplayPort 1.4/2xHDMI 2.0B/RGB Fusion 2.0/Gaming Motherboard)

Have no idea what all the negative reviews are all about but this little board is an absolute beast. I have the itx and atx versions and couldn’t be happier. Have been running these computers daily for close to a year now and am a content creator. They are made really well and with nvme gen4 on all m.2 slots and x16 slots it runs crazy fast with two Sabrent rocket nvme gen 4 ssds. And any new 3000 series or amd graphics cards that support pcie gen 4. I actually love the gigabyte bios and especially the @bios app to easily update bios and the other gigabyte apps like easy tune, siv, etc. 100% would recommend to anyone building a high performance Ryzen build. Runs the Adobe suite like a champ!

I have had this thing for a while now and I got to say that it has done a great job. I have always had a good experience with Gigabyte Motherboards and this one didn't disappoint. I usually stuck to their lower end products until I bought this thing to prepare for the Zen 3 release a while ago. I really like the Wi-Fi antenna too since it isn't in the way of the other USB ports compared to other motherboards I've used. For $300 I say it was money well spent.

System Gigabyte X570 I Aorus Pro Itx form factor, with AMD Ryzen 5600g and 32gb G-Skill RipJaws 2400 DDR4. First off, the memory would not run at the advertised 2400Mhz, downgraded automatically to 2133Mhz. I went into the Bios and implemented PMX 1st profile which was the advertised 2400Mhz rate and over clocked the cpu to 4gb. Woha, heat problems galore. Went back in Bios and downgraded back to 2133Mhz and 3.9 on the cpu. Still heat problems galore. I am using the Noctua NH-L9a-AM4 low profile cpu heat sink and fan. This may be my heating problem? I will change out for the stock cpu fan and see if my heat problem goes away. The problem is, the case, fan will not fit with cover, but can still see if it cures the heat problem. If not, I will be return this MoBo and the Noctua NH-L9a-AM4 low profile cpu heat sink and fan. And replacing with the Asus X570 ITX Mobo. Any way I look at it is either the fan, Mobo or case. I used a A09 case with the Asus X570, T force 3600 ram and stock fan and have no problems running at 4Ghz and 3600 on the ram, no overheating problems. I will update as the information comes available.Update: Problem was the Noctua NH-L9a-AM4 low profile cpu heat sink and fan. Just sitting there at an idle the heat would rise above 51c. And under a work load it would overheat. Took the Noctua NH-L9a-AM4 low profile cpu heat sink and fan out and replaced with the stock AMD Ryzen fan and whala, no more heat problems and the MoBo board runs cooler as well. 45/46c cpu and 41c system temp. Problem is, I cannot put the cover on the case due to the stock fan too high by 9mm. Well new case, which I had already ordered but takes 22 days to get here from Hong Kong and does not look as nice. Anybody know of a mini ITX case in the states that is deep enough to accommodate a stock fan? I sure cannot find one and have ordered many and have sent back.Update: I modified the case cover just a little by removing the tabbed in steel mesh and cutting away some of the steel to accommodate the AMD label out cropping on the fan's plastic cover. Hacksaw, pliers and file were all it took. made sure it fit by filing the metal and gave it about 2mm room on all sides. I had to modify the mesh screen a little by bending it up. Put the mesh screen back on and it fit perfectly and almost looks stock. From arm's length you cannot tell It has been modified. still runs a little hotter than my Asus X570 rig but does not overheat like it did with the low-profile heat sink and fan mentioned above.

Gigabyte makes great boards and this is no exception. It ticked all the boxes at the time of purchase:- Newest processor(s)- Mini-ITX (for the case)- Sufficient ports for all the "stuff" I needed to plug in via USB- Sufficient PCI slotsThat said, I really wish this board had 4 memory slots. I get it's a tiny little thing, but there are other mini-ITX boards that support 4 DIMMS and that's my only real complaint. Other than that, it's a fantastic motherboard.