TEAMGROUP T-Force Dark Pro Samsung IC 16GB KIT (2 x 8GB) 3200MHz (PC4 25600) CL 14 DDR4 Gaming Desktop Memory Module 288-Pin SDRAM Ram Upgrade

Didn't get from Amazon found on new egg much cheaper. Rest of my hardware I did buy from Amazon except GPU (Best Buy) and NVMe (New EGG) My Computer Specs below. RYZEN 2700X CPUWhat can I say other than awesome! Plugged these into mobo and they work well! I have had them over clocked to 3400 and 3466 With the tight timings and they benchmarked great but have't been able to keep them stable yet at those speeds. I have them stable at 3333 with 14 14 14 31 52 1T and haven't had any glitches. These are high quality Samsung b die and look great! (NOT RGB LED) I would definitely recommend these. Much cheaper than corsair or gskill and they perform well!CPU: MD Ryzen (2nd Gen) 2700XMotherboard: ASUS ROG Crosshair VII HeroMemory: Teamgroup 2x8GB (16GB) DDR4 T-Force Dark Pro 3200 CL14-14-14-31 1.35VGraphics: EVGA GeForce 1070Ti 16GBStorage: Samsung 970 EVO NVMe 500GB x 2 RAID 0 Crucial MX500 SSD 500GB Western Digital Black HDD 1TB x 2 RAID 1CPU Cooling: Corsair H115i Pro RGB 280MM AIOPower Supply: Corsair HX1200i PlatinumCase: bequiet! Dark Base 700 w/ 2 140MM Silent Wings 3 fans

Another PERFECT Dark Pro RAM kit!I run two different Dark Pro kits because this RAM is very hard to get in Europe (currently it is not available in Europe or UK at all that's why I imported this kit from America, the other 16GB Dark Pro kit I got half a year ago at Caseking.de). One Dark Pro Kit is rated CL14-15-15-35 1,45 volts at 3600MHz and the newer one is rated CL-14-14-14-31 with 1,35 volts 3200MHz.Both are top notch quality Samsung B-Die which means they are beyond overclockable, and I currently run them at 2666MHz with a Ryzen 5 2400G with supertight CL 12-12-12-32 latencies at 1.3300 volts. 100% stable and cool as a block of ice.I have chosen 2666 MHz over the Ryzen Zen 1 RAM clock limit of 2933 MHz to keep the computer absolute cool and quiet (zero noise at all is way more important than having 4FPS more but the cooling fan noise of a vacuum cleaner right next to me!)Just like the other Dark Pro kit the new one which I bought here also is absolute stable and runs rock-solid with no problems at all, I bet the latencies could be tightened down to CL10 or even CL9 while running it under 3000MHz but I am to lazy to reset the BIOS if it refuses to boot when I do overclocking errors so let's keep it on CL12 for the time being.Both RAM kits run with undervolting, the older 1,45V kit ran without any problems and no crashes or bluescreens at all with 1,3800 volts for half a year, and for the new 1,35V kit combined together with the 1,45v kit I have choosen to run both with 1.3300 volts which is perfectly stable and cool as ice when touching the RAM - even when the PC was running games for hours.Finally Elden Ring has no more stuttering at all when panning the camera around, all other games run way more fluent, and it is no problem anymore having ten YouTube tabs and Photoshop open - no more stuttering or lagging in Photoshop.The visual design of this RAM is outstanding good-looking, a sleek technical minimalist design with two-tone grey and black colour scheme and no stupid LED bling-bling-flash-flash and cheap looking plastic covers (like 90% of all other RAM's look like nowadays: like some stupid toy).Not the Dark Pro, the Dark Pro feels massive and heavy and high quality when holding it and it looks absolute serious sleek. And everything all around is made of full metal in highest quality design.Therefore the Dark Pro fits perfect into any dark stealthy computer build.As soon as I have a Ryzen 5600G in my system I plan to run this RAM at 3000MHz with CL11 latencies, and I am going to update this review to write how well overclocking is going to work out with both Dark Pro kits :)But currently I don't own any graphics card that's why I need to run my old Ryzen 5 2400G with Vega 11 APU - and with a Zen 1 Ryzen overclocking experiments are a little bit limited.Have a nice day and enjoy the worlds best looking and highest quality RAM!

(another update) at this time, im running a 5800x (FINALLY) with the SAME KITS you seen mepraise for doing 4000 c16-16 in those other shots on this review.well im back to not only praise these sticks EVEN MORE! but to state that they indeed will run 3800/1900 c14-14 FLAT at 1.54V (with proper adjustments to secondary timings and proc/drive strengths etc)ive been running these with these timings now for around a week (with a 90mm fan) without the fan blowing over them they do indeed throw errors in TM5 and HCI and y-cruncher wont even pass..(the last 4 pictures are what im running now) and i must give credit where credits due, im using a "daisy chained MSI b550 board" so its nearly IMPOSSIBLE to get something like this running right withoutcatching some grey hair here and there. anyhow, without a doubt these are some truly great sticks(ONLY FOR THOSE WILLING TO PUSH THESE B-DIE STICKS TO THE EXTREME)!now the only complaint i have, is while i have 2x8x2x8 (two sets of the same stuff there not a 4 pack matched kit but again ARE THE SAME MODELS) team switched some timings down in secondarys etc thats not stated on the main product page. so, for 2x8 these will be an easy setup, even 4x8 but when your on the edge of stability like im at now, its well....if your still reading then you already know!!still recommend these to those who wish to overclock their RAM/IMC on ryzen!(UPDATE FEB 14th 2021) (added correct photos for 4x8 config with aida benchmarks for 4x8 (16gb is 2x8, 32gb is obviously 4x8) if your not going to overclock this ram, DONT BUY team has another option for amd instead, there 3600mhz c18 kit is decently priced and will be perfect for RYZEN builds!) had this kit for a while now, and grabbed a second kit from another site ill not mention, same kits, however team switched tRC on the 3200c14 kits from 45 to 97 which isnt much a problem, or you shouldn't believe it to be. considering i was able to get 100% full stability at 4000mhz with fclk at 2000, c16 flat, with super tuned subs. included UPDATED timings and aida benchmarks to show and tell team group NOT to claim that their 3200 c14 dark pro kits wont do 4000mhz at c16. because they actually go farther quite a bit farther actually. but i could not satbilize 4 sticks at that frequency on my b550 gaming edge board. (im not an expert at ram overclocking anyhow. (stabilizing this took over a weeks time.) and i suggest using y-cruncher, OCCT, prime 95 sfft, TM5, and HCI memtest) NOT MEMTEST 86 there is a difference. just google HCI MEMTEST to stress test ram kits when you wanna be sure because HCI will stress it all, memtest will miss etc. anyhow LOVE these kits. kinda sad ive not heard back from teamgroup in my email by now. but i already figured out what my issue was. and i still have no clue what PCB revision R2 is. which from what i can find its A2 layered. anyhow you can use the timings above as a rough guid. 32gb is 4 sticks, and 16gb is 2 sticks. both are stable on my pc.UPDATE 1/7/2021 had this kit for about a month or so now, and as you can see im able to get extremely good timings with this kit on a b550 gaming edge wifi board (updated drivers/bios etc) running my 5600x with 2000fclk at low voltages with the timings im using this kit is simply put COMPARABLE TO NONE!!!! im sure theres room for more improvments and i should have screenshotted TM5, HCI, Y-cruncher stress tests and how they passed (not forgetting p95 small FFT as its a hardcore ram test) but still take my word for it. THIS IS THE KIT YOUR LOOKING FOR OVERCLOCKERS!!! just wished the price would go back down a little so i could snag another kit and run 4 sticks and see what im able to hit there, bc 5000 series love 4 sticks vs 2! (pic without hwinfo is latest timings etc, this is stable @1.4V llc3 just upped it for no reason as i thought i had to but was my cpu overclock crashing desktop. removed the cpu oc and it stopped crashing out.)as of today, ive had this kit used on a 3600xt, and 5600x both to which i overclocked the absolute crap out of this kit using the same timings on both cpus, only the 3600xt had a 3800mhz 1900fclk oc, and the 5600x has a 4000mhz 2000fclk overclock to it. i included zen timings, and my aida scores, L3 cache is low but thats a bios issue with the agesa code from msi not the ram or cpu causing this issue.my kit is the 3200c14 tforce Dark PRO, when i bought this kit i got it new for around 120 total? was at its lowest pricing yet. i cant say ive found ANY of my kits better than these as these are ALWAYS samsung Bdie! not that typhoon burner is accurate by any means telling me i have 3 kits of bdie when i only have one by using the manufactures websites and seeing what experts say i have two other E die kits from corsair LPX which wont boot on none of my CPUs, or boards for that matter. anyhow, if your into overclocking ram and want a good looking kit for your build look no further. im unsure if these will work with all coolers as you can see im using an AIO.but if ya do want a BEAST at overclocking and working on your board reguardless if its QVL certified or not then these will more than likely be what your after. REMEMBER all teamgroups ram have LIFETIME warranty! THANK YOU TEAMGROUP!!! i also have 4 other team kits as well lol!